Microbt Whatsminer M20s for sale
Whatsminer M20S 65T is a powerful SHA256 miner, is produced by Microbt Asic manufacturer, M20s 65T has an energy efficiency ratio of 58W/Th, it supports BTC, BCH, and other SHA256 based cryptocurrency products.
Xingjia provides high-quality Whatsminer M20S 65T with sufficient stock. Each product has undergone strict quality inspection before being sent out to ensure that the quality of the products received by customers is in good condition.
If you have any questions, please feel free to contact us.
Whatsminer M20S 65T Product Parameters Introduction
|Model||Whatsminer M20S 65T|
|Size||130 x 220 x 390mm|
|Temperature||-5 – 40 °C|
|Humidity||5 – 95 %|
Whatsminer M20S 65T Handling Precautions
Whatsminer M20S 65T power control cable, adapter board control cable, and fan control cable must be connected correctly. If you hesitate to connect incorrectly, it will cause damage to the control board, hash board, adapter board, fan, etc.,
Then the whole machine and veneer are not covered by the warranty.
When connecting the cable to the control board, the buckles must correspond, and the cable plug cannot be inserted into the socket in reverse. If it is inserted backward, it may burn the control board after power-on, thereby damaging the signal cable.
Before wiring and powering on the miner, shake the miner according to the warning signs on the side of the miner to check whether a radiator or other components is falling off. It must be ensured that no radiator or other components are falling off before wiring and power-on.
The miner is connected to the power cable, the network port is connected to the switch, and the power control cable, fan control cable, and adapter board control cable are checked.
When the power copper bar is connected to the hash board, the positive and negative electrodes of the copper bar cannot be connected incorrectly, and the screw gaskets that fix the copper bar must be aligned parallel to the edge of the copper bar, and the fixing screws must be tightened, otherwise, it may cause burnout hash board,
The control board or power supply is damaged due to the reverse connection of the copper busbar.
The power control line between the control board and the power supply must be connected, otherwise, the hash power of the hash board may be low due to the inability to control the voltage output.
Whatsminer M20s characteristics
Whatsminer M20S is a versatile device with fewer wire connections, a smoother and more beautiful appearance, and easier to use and operation.
As an ASIC mining device, Whatsminer M20S consists of three computing boards and a main control board.
Whatsminer M20S can still maintain cooling in the harshest environments.