Antminer l3+ for sale
Bitmain Antminer L3+ is a model launched by Bitmain in 2017. It is specially used for Litecoin mining. It has large computing power and low power consumption, and can meet the needs of many miners with less capital.
And its feature of mining Litecoin and giving away Dogecoin has also attracted many miners to buy this model.
XJ offers fully stocked Bitmain Antminer L3+ for sale, each product has undergone strict quality inspection, and products are tested before shipping to ensure that the miner is functioning properly, and enough is added when each product is shipped buffer substances, to protect the product from damage in transit, if you have any questions, please feel free to contact us.
|Antminer L3+ (600Mh)
|188 x 130 x 352mm
|9 * 6pins
|11.6 ~ 13.0V
|0 – 40 °C
|5 – 95 %
Appearance and production of the Bitmain Antminer L3+
Different from other models of mining machines, the Bitmain Antminer L3+ adopts a mining machine design with front and rear dual fans and four computing power boards. Other antminer series are designed with three computing power boards, and the body is integrally formed, using precision die-casting design and aluminum Alloy materials,
It provides strong protection for the computing chip, and can also improve the overall cooling efficiency of the fuselage.
From the top of the miner, you can see that the Antminer L3+ has four hash boards, each with three PCI-E6pin interfaces, and four data lines connecting the hash board to the controller, and you can also see the control board Interface.
From the front of the miner, you can see the IP address, feedback button, network cable interface, reset button and status indicator, etc. You can also see the front fan of the miner from the front. It can be seen that the rear fan of the Bitmain Antminer L3+ is ventilated.
Noise test of Bitmain Antminer L3+
Mining was carried out in the PPS mode of AntPool. The test site was a conference room with an area of about 30 square meters, and the room temperature was 20 degrees. The heating and noise tests were carried out after the mining machine was running for 24 hours.
At a distance of 10cm from the mining machine, the test results show that the noise of the mining machine is 74dB, but the noise at a distance of 1 meter is reduced to 66dB. Generally speaking, the noise of the Bitmain Antminer L3+ is relatively small, and there is not much noise after closing the door. Noisy.
Power of Bitmain Antminer L3+
The official computing power data of Antminer L3+ is 504M. In the 24H test, the actual average computing power fluctuates around 500M/S, which is similar to the official standard value. The official standard power consumption of Bitmain Antminer L3+ is 800W,
In the actual test, the power is 773W, which is similar to the official standard value data.
The overall performance of the Bitmain Antminer L3+ is very good, the power consumption per unit of computing power is 1.53W/M, the computing power remains stable under long-term work, and the noise of the Antminer L3+ is relatively small, and the impact on the environment can also be reduced